What Can I Make With a Rag Rug

Download Article

Download Article

You can detect rugs in just about every room in the home, from kitchens to bathrooms, bedrooms to offices. They habiliment out quickly, withal, and at that place's no guarantee that y'all'll find the perfect rug in a store. Luckily, information technology is easy to brand a rag rug. From braided to woven, in that location are lots of ways to make a rug. All-time of all, they are all eco-friendly likewise!

1. 1

   Get a non-slip, safe carpeting mat. It is a rubber mesh-similar mat that people identify nether rugs to keep them from slipping. You can normally find them aslope the other rug-making supplies in an art shop, or in the abode-improvement department of a store.

2. 2

   Cut the mat downward to the desired size. Not-slip rubber mats for rugs come up in rolls, so you will need to cut yours downwardly to the right size. You lot tin can make your rug a square or a rectangle. Yous tin can even cut it into a shape, such as a crescent moon or heart.^[one]

   Advertisement

3. three

   Cut your fabric into sparse strips. Stack several pieces of cotton material together, so cutting it into one by 5-inch (2.54 by 12.7-centimeter) strips. You can use all ane colour, just using two or iii volition make your rug look more interesting.^[2]

   • Consider using one solid color and one coordinating pattern.
   • Using a rotary cutter will make cutting the fabric strips faster and easier.

4. iv

   Pull a fabric strip through two of the holes in the mat. Use a pair of tweezers to pull the textile strip down through 1 hole and out the other. Make sure that the strip crosses under the corner between two squares; don't cantankerous it nether the bodily square itself.

5. 5

   Necktie the two ends of the strip together, if desired. You don't have to do this, but it will make your rug more durable and prevent the strips from falling out.

6. half dozen

   Echo the process for the rest of the holes and strips until the carpeting is filled. Start at 1 finish of the carpeting and piece of work your way to the other in rows. If you are making a shape, such as a eye, showtime at the center of the rug and piece of work your way outward.^[three]

   Advertisement

1. 1

   Cull cloth to use equally your base and every bit your scraps. Your base material should be sturdy and already cut to the size and shape you lot desire your rug to be. A towel will piece of work bang-up for this, only you can also use canvas. For your bit fabric, choose something that doesn't fray much, such as jersey or cotton.

   • If your base fabric isn't hemmed, have a moment to exercise so now.
   • Your fleck fabric doesn't have to match. Effort using coordinating patterns and colors!

2. ii

   Describe parallel guidelines on your base fabric, then prepare it aside. The lines should run across the width of your fabric. The closer together yous make these lines, the denser your rug will be; go along in mind that y'all'll also need to use more fabric also. About ane inch (ii.54 centimeters) apart would be a good place to start.^[4]

   • Employ a dressmaker'due south pen and a ruler for this. The lines will disappear when you launder the fabric.
   • If y'all are making a round or oval carpeting, depict rings inside the rug, like ripples, instead.
   • Do non depict guidelines on your bit fabric.

3. three

   Cut your scrap textile into small, skinny rectangles. You will exist sewing these onto a larger piece of fabric to make a shaggy rug. The rectangles tin can be whatever size you want them to exist, but four by 1 inches (10.16 to 2.54 centimeters) is a good identify to first.^[five]

   • Cut your fabric a few pieces at a fourth dimension. They mode, the rectangles will all come up out the same size.

4. 4

   Lay down the first few cloth scraps beyond the first parallel line. The scraps need to be centered on the line, so that you have 2 inches (v.08 centimeters) sticking out to each side. Overlap each bit by a small amount—no more ¼ inch (0.64 centimeter).^[6]

   • The get-go scrap needs to exist right up against the border of the base cloth.

5. 5

   Sew the scraps down using your sewing car. Use a directly stitch and a thread color that either matches your base fabric or coordinates with the scraps. Backstitch beyond the starting time scrap a few times, then sew straight downward, using the parallel line as a guide.^[vii]

6. 6

   Add a few more scraps and proceed sewing. Keep adding and overlapping scraps to the parallel line until you achieve the lesser of the rug. Backstitch a few times across the last scrap. Trim off the excess thread.

7. 7

   Fold the scraps to the side to reveal the next parallel line. If y'all started on the left side of the carpeting, you should fold the scraps to the left. If you started on the right side, you lot should fold them to the right. Y'all have to do this to go the scraps out of the way. If y'all don't, you will accidentally run up them down when yous do the next row.^[viii]

8. 8

   Sew down the next row of scraps using the aforementioned method as before. At present that you have to scraps out of the style, sew down more scraps to the next parallel line. Call back to overlap them and to backstitch at the start and end of your sewing. When y'all finish that row, fold the scraps over and exercise the next one. Keep going until y'all reach the opposite end of the rug.^[9]

9. 9

   Finish the rug. Once you have all of the scraps fastened, go over your rug and snip off any loose or hanging threads. Your rug is now gear up to use!

   Advertizing

1. 1

   Cut your fabric into strips. How wide y'all cut the strips is upwardly to you, but they should all be the same width. Something around 1½ inches (cc centimeters) wide would exist ideal.^[x] Yous can use whatsoever type of cloth you want for this, but old bed sheets or t-shirts work exceptionally well.

   • If you lot are using patently cotton bed sheets, cut a notch into the fabric showtime, then tear it.^[11]
   • If you are using t-shirts, cutting the strips in one, continuous strand, starting from the bottom hem and finishing under the armpits.^[12]

2. two

   Knot iii strips together at the top. Pivot the strips to something that tin can hold them steady while you lot work, such every bit the couch. Yous tin can also secure a safety pin to the terminate, then use a hook to attach it to a cabinet knob or handle.^[13]

3. 3

   Complect the strips together tightly. But cross the left and correct strip over the middle i. From time to fourth dimension, coiling the braid as you work so that you can encounter how your carpeting is forming.^[xiv]

4. 4

   Join two strips together, as needed. Cutting a slit in the end of the first strip, and the beginning of the adjacent strip. Slide the end of the first strip into the slit of the 2nd strip. Side by side, thread the rest of the second strip through the slit on the first strip. Tug on the ii strips to tighten the knot.^[15]

5. 5

   Keep braiding until you go the size you want, then secure the end with a pin. Gyre your braid into a circular spiral equally y'all braid it. Once yous get the size of rug you want, secure the strips together with a sewing pin or a safety pin. Cut off the excess strips.

6. 6

   Fold the end of the braid onto itself and run up information technology down. Go back to where you started the braid. Remove the rubber pivot, then fold the knot against the braid. Sew the knot to the braid by mitt or using a big, loose zigzag stitch on your sewing machine.

   • If you are using a sewing auto, backstitch at the starting time of your sewing.

7. vii

   Sew the carpet into a screw. Begin to wrap the rug into a screw, sewing the two edges together. One time again, you tin can do this by hand or on a sewing machine. If you are using a sewing machine, exist sure to use a loose, big zigzag sew together.^[16] When you reach the concluding ii inches (five.08 centimeters), stop.

8. 8

   Finish the carpet past tucking and sewing the end downwards. Fold the end of the complect against itself by ane inch (2.54 centimeters). Continue sewing the complect to the rest of the rug, sandwiching the end inside. Knot and snip the thread when you lot are done.

   • If you are using a sewing machine, remember to backstitch at the end of your sewing.

   Ad

1. ane

   Cut a slice of paper-thin into a rectangle to apply equally a base of operations. The rectangle needs to exist four inches (10.16 centimeters) taller and 4 inches (ten.16 centimeters) wider than you desire the finished carpeting to be. Information technology would exist easiest if y'all use a box cutter, but you can use pair of scissors too.

2. 2

   Cut evenly-spaced slits into the narrow edges of the paper-thin. Cutting 2-inch (5.08-centimeter) long slits into the narrow ends of the cardboard. Outset and terminate making the slits 2 inches (five.08 centimeters) from the each side of your paper-thin. Infinite the slits ½ inch (one.27 centimeters) apart the rest of the way. Use a ruler to make your lines prissy and straight.

   • Brand sure that the superlative and bottom slits align.^[17]
   • You are leaving a ii-inch (5.08-centimeter) gap on both sides of the paper-thin for strength and durability.

3. three

   Cut your fabric into strips. Cotton cloth from quondam (only make clean!) bed sheets will piece of work the best for this, but you can use other types too. Cut the fabric into 2-inch (5.08-centimeter) strips.^[18]

   • If you are using cotton, you can save time by cutting a notch into the fabric first, then tearing it.
   • If yous are repurposing a t-shirt, cutting the strips in 1, continuous strand, starting from the bottom hem and finishing under the armpits.^[19]

4. 4

   Insert both ends of your strips into each slit on the loom. Take your beginning strip. Place one finish into the first slit on the height of the cardboard, and the other end on the kickoff slit on the bottom. Do this for all of the slits.^[20]

   • Make sure that you lot accept an even amount of fabric hanging out of the slits.

5. 5

   Wrap a piece of tape around a new strip, and brainstorm to weave information technology. Cull a new strip of fabric to begin weaving with. Wrap a piece of tape around the end (preferably masking) to brand it nice and strong. Weave it over and nether across the vertical strips on your cardboard, starting from the left. When you get to the contrary (right) terminate, pull on the weaving strip until you have a 6-inch (15.24-centimeter) long tail.^[21]

6. 6

   Weave your mode back to the left side. This fourth dimension, weave in the opposite direction. If yous finished weaving under on the first row, begin weaving over on the 2nd row, and vice-versa. When you lot complete the second row, push it up confronting the kickoff ane and so that it is straight and snug.^[22]

   • Don't pull, otherwise your rug will curve inward.

7. 7

   Keep weaving back and forth, joining strips as needed. Cut a vertical slit into the end of your offset strip, and the beginning of the side by side strip. Slide the cease of the showtime strip into slit of the second strip. Next, pull the entire 2d strip through the slit on the first strip. Tug on the strips to tighten them.^[23]

8. 8

   Tie the ends of the weaving strips to the fringe when you are washed. When you reach the bottom row of slits, stop. Cutting your weaving strip until it is about 6 inches (15.24 centimeters) long. Pull the strip closest to the border out of its paper-thin slit, then tie the ii together in a tight, double knot. Repeat the process for the top.

9. 9

   Cut the fringes. Flip the loom over so that y'all tin see the back. Hold the fringes down with one hand as yous cut across them. How short you brand them is up to yous. Recollect to trim the fringe that you tied to the weaving strips as well.

10. ten

    Remove the carpeting from the loom. Your rug is now fix to employ!

    Advertisement

1. i

   Cut your fabric into ane-inch (2.54-centimeter) strips. Regular cotton fabric from a bed canvas will work the best. Information technology would exist even amend if you use a duvet cover, however; this way you can cut the fabric in one, continuous strip.^[24]

   • If you are using old t-shirts, cut the fabric in one continuous strip, starting from the bottom hem.

2. 2

   Join the fabric strips together. Cut a vertical slit into the end of 1 strip, and the outset of another. Slide the end of the first strip through the slit on the second strip. Push the opposite terminate of the second strip through the slit on the first strip. Pull on the second strip to tighten the knot.^[25]

   • Do this for all of your strips until you have one, continuous strip.
   • Curlicue your strip into a ball to forestall it from tangling.
   • If yous cutting the fabric in one continuous strip, yous don't have to do this.

3. three

   Create a magic circle with half dozen single crochets inside of it. If you don't know to how to do a magic circle, do 2 concatenation stitches, then 6 single crochets into the 2d chain. Bring together the outset and last single crochets with a slip stitch.^[26]

   • Use the big, chunky crochet hooks meant for t-shirt yarn.
   • For this method, the concluding slip sew together does not count as a sew.

4. iv

   Practice a single crochet increase in each run up. Begin round 2 with a concatenation sew. Side by side, do 2 unmarried crochets in each stitch. Join the start and last stitches together with a slip run up.^[27]

5. five

   Exercise a single crochet increment in every other stitch. Begin round three with a chain stitch. Exercise 2 single crochets in the commencement run up, and 1 single crochet in the next. Repeat this pattern for the residual of the round. Join with a skid sew.^[28]

6. six

   Continue making rounds with increasing stitches until yous get your rug size. Always brainstorm your rounds with a chain stitch. Follow upward with ii single crochets in the first stitch. Side by side, increase the number of single crochets with each circular. Close each round with a slip stitch. For example:^[29]

   • Circular iv: Ch 1, 2 sc in first stitch, i sc for next 2 stitches, repeat for round, then join with sl st.
   • Round 5: Ch 1, 2 sc in first stitch, 1 sc for next 3 stitches, repeat for round, then bring together with sl st.
   • Circular 6: Ch 1, two sc in kickoff run up, one sc for next 4 stitches, repeat for round, then join with sl st.

7. 7

   Finish your carpeting with a single crochet in every stitch. Begin with a chain stitch. Practice 1 single crochet into every stitch. Bring together the first and last unmarried crochets with a slip sew. Do a final chain run up, so necktie the finish off. Cutting off any excess fabric yarn.^[30]

8. 8

   Weave the tail ends of the fabric into the rug. It would be easiest to do this with a smaller crochet hook. Weave in the tail on the outer edge of the rug showtime, then do the center.^[31]

   Advertisement

Add together New Question

• Question

  How practise I keep the cloth from coming untied? I made ane for my granddaughter, and it is coming untied.

  

  Perhaps y'all cut the strips too brusque, so they pull out. Information technology might be that yous didn't weave in the strips closely plenty, equally it is the bulk of the fabric tightly packed together that helps go along them all in place. At this bespeak, post-manufacture; the merely remedy is to add together more strips to make information technology denser, or to tie or sew the strips in.

• Question

  How can I determine the finished size and shape when making a rectangular carpeting or large oval rug?

  

  There is no right answer. It all depends on what type of textile you use and the method. Don't be agape to but go for it. If information technology'south too modest, you lot now know that the adjacent time you make it, you'll brand it larger or longer.

• Question

  How do I border my rag carpet?

  

  A braided or crocheted carpet needs no edging. The other rugs will need something to finish. Usually rugs are finished by sewing on strips of material. Traditionally this was hessian (the same cloth that was used for the base of operations of a shag rug), merely y'all tin can utilise cotton or toweling. Cut ii long strips of around 2 inches past the length of your rug and 2 strips that are ii inches by the width. Fold over the terminate of a strip and then the raw edge is just within, and sew it onto the last 3/4" of material on the 'best' side. Then tuck it over the border of the carpet, fold in the other edge of the strip, and sew it onto the underside.

• Question

  I tried braiding a carpeting once, and no matter how loosely I wound it around the center, it even so puckered upwardly and had a large lump in the middle of the rug. How do I avoid making it lump up in the center?

  

  Try winding it upwards while keeping it flat on the flooring or a table - think winding upwardly a horizontal Catherine bicycle. It could exist that at that place is a slight flexing in the way you wind information technology. As you lot say, winding too tightly will practise this, too.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

Video

• Bed sheets make great textile scraps! Just make sure that they are clean.

• Call up to wash your textile commencement to remove any shrinking.

• While you tin utilize dissimilar colors and patterns for your rug, it's all-time if y'all stick with merely i type of material. Otherwise, you adventure getting an uneven texture.

• Save fourth dimension by stacking several sheets of fabric together, and and so cutting them.

• Many craft stores sell apartment rubber adhesives. Information technology's an cheap solution to continue a homemade rug from sliding virtually on the floor. Test first to brand certain there is no color drain. Another option is the rubber mode drawer/cabinet liners.

• Consider using one solid colour and one coordinating design.

• Arm knitting is another technique yous can use for making a rag rug.

Advertisement

Things You'll Need

• Not-skid safety rug mat
• Fabric pair of scissors
• Cotton cloth
• Tweezers

• Towel or canvas fabric
• Cotton or jersey fabric
• Textile pair of scissors
• Fabric pen
• Ruler
• Thread
• Sewing machine

• Cotton or bailiwick of jersey cloth
• Fabric scissors
• Thread
• Sewing motorcar
• Safety pin

• Cardboard
• Box cutter or scissors
• Cotton or jersey fabric
• Fabric scissors

• Cotton or jersey material
• Fabric scissors
• Large crochet hook (for t-shirt yarn)

About This Commodity

Article Summary X

To braid a rag rug, first cut your fabric into strips of equal width. Knot iii strips together at the top, so braid the strips, crossing the left and correct over the middle repeatedly. Continue adding strips to your complect by cutting a slit into the end of one strip and slicing another slit into the beginning of the new strip. Slide the end of the first strip into the slit of the second and thread the rest of the second through the slit on the first. As y'all piece of work, roll your braid into a circular screw. Then, when your carpet is the right size, sew the coiled edges together and tack down the ends. If you want to acquire how to crochet or knit your rag rug, keep reading the article!

Did this summary help you?

Thanks to all authors for creating a page that has been read 451,666 times.

Did this article help you?

gauvincreter.blogspot.com

Source: https://www.wikihow.com/Make-a-Rag-Rug

Share this post